SAE J222:2000 pdf download

SAE J222:2000 pdf download Parking Lamps (Front Position Lamps)
1. Scope— This SAE Standard provides test procedures, requirements, and guidelines of parking lamps (front position lamps).
References
Applicable Publications— The following publications form a part of this specification to the extent specified herein. Unless otherwise specified, the latest issue of SAE publications shall apply.
SAE P UBLICATIONS —Available from SAE, 400 Commonwealth Drive, Warrendale, PA 1 5096-0001 .
SAE J567—Lamp Bulb Retention System
SAE J575—Tests for Motor Vehicle Lighting Devices and Components
SAE J576—Plastic Materials for Use in Optical Parts Such as Lenses and Reflectors of Motor Vehicle Lighting Devices
SAE J578—Color Specification
SAE J759—Lighting Identification Code
2.2 Related Publications— The following publications are provided for information purposes only and are not a required part of this document.
SAE P UBLICATIONS —Available from SAE, 400 Commonwealth Drive, Warrendale, PA 1 5096-0001 .
SAE J592—Clearance, Side Marker, and Identification Lamps
SAE J585—Tail Lamps (Rear Position Lamps) for Use on Motor Vehicles Less Than 2032 mm in Overall Width
SAE J586 FEB84—Stop Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width
SAE J588 NOV84—Turn Signal Lamps for Use on Motor Vehicles Less Than 2032 mm in Overall Width
SAE J594—Reflex Reflectors
SAE J1 395 APR85—Front and Rear Turn Signal Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
SAE J1 398 MAY85—Stop Lamps for Use on Motor Vehicles 2032 mm or More in Overall Width
SAE J1 957—Central High Mounted Stop Lamp Standard for Use on Vehicles Less than 2032 mm Overall Width
SAE J2040—Tail Lamps (Rear Position Lamps) for Use on Vehicles 2032 mm or More in Overall WidthSAE J2042—Clearance, Sidemarker, and ldentification Lamps for Use on Motor Vehicles 2032 mm or
More in Overall Width
2.2.2
FEDERAL PUBLICATION —Available from the Superintendent of Documents,U. S. Government Printing Office,Washington, DC 20402.
FMVSS No.108—Turn Signal Geometric Visibility Requirements (56 FR 64733-64737)Definitions
3.1 Parking Lamps— Whether separate or in combination with other lamps, parking lamps are located on both the
front left and right of the vehicle which show to the front and are intended to mark the vehicle when parked. Inaddition, these front lamps serve as a reserve front position indicating system in the event of headlamp failure.
4.Lighting ldentification Code—Parking lamps may be identified by the code “P” in accordance with SAE J759.
5.1SAEJ575 is a part of this report. The following tests are applicable with the modifications as indicated:
5.1.1 VIBRATION TEST
5.1.2 MOISTURE TEST
5.1.3DuST TEST
5.1.4CORROSION TEST
5.1.5 PHOTOMETRY TEST—In addition to the test procedures in SAE J575, the following apply:
5.1.5.1 Photometric measurements shall be made with the light source of the lamp at least 3 m from the
photometer. The H-V axis shall be taken as parallel to the axis of reference of the lamp as mounted on thevehicle.
5.1.6WARPAGE TEST FOR DEVICES WITH PLASTIC COMPONENTS
5.2Color Test—SAE J578 is a part of this report.
6.Requirements
6.1 Performance Requirements— A device, when tested in accordance with the test procedures specified in
Section 5, shall meet the following requirements.