SAE J1850:2001 pdf download

SAE J1850:2001 pdf download Class B Data Communications Network Interface
1. Scope—This SAE Standard establishes the requirements for a Class B Data Communication Network Interface applicable to all On- and Off-Road Land-Based Vehicles. It defines a minimum set of data communication requirements such that the resulting network is cost effective for simple applications and flexible enough to use in complex applications. Taken in total, the requirements contained in this document specify a data communications network that satisfies the needs of automotive manufacturers.
This specification describes two specific implementations of the network, based on media/Physical Layer differences. One Physical Layer is optimized for a data rate of 1 0.4 Kbps while the other Physical Layer is optimized for a data rate of 41 .6 Kbps (see Appendix A for a checklist of application-specific features).
The Physical Layer parameters are specified as they would be detected on the network media, not within any particular module or integrated circuit implementation. Although devices may be constructed that can be configured to operate in either of the two primary implementations defined herein, it is expected that most manufacturers will focus specifically on either the 1 0.4 Kbps implementation or the 41 .6 Kbps implementation depending on their specific application and corporate philosophy toward network usage. However, low-volume users of network-interface devices are expected to find it more effective to use a generic interface capable of handling either of the primary implementations specified in this document. This SAE document is under the control and maintenance of the Vehicle Networks for Multiplexing and Data Communications (Multiplex) Committee. This committee will periodically review and update this document as needs dictate.
1.1 Objectives—This document constitutes the requirements for a vehicle-data communications network. These requirements are related to the lowest two layers of the ISO Open System Interconnect (OSI) model (Ref. ISO 7498). These layers are the Data Link Layer and the Physical Layer. This network has been described using the ISO conventions in ISO/TC 22/SC 3/WG1 N429 E, dated October, 1 990. Both documents are intended to describe the same network requirements but using different descriptive styles. If any technical differences are identified, the very latest revision of these documents should be used. This document has been submitted as an American National Standard. As such, its format is somewhat different from the formal ISO description in that descriptions have been expanded, but are in no way less precise. A more textual format has been adopted herein to allow explanations to be included.
The vehicle application for this class of data communication (Class B) network is defined (Reference SAE J1 21 3 APR88) to allow the sharing of vehicle parametric information. Also per the definition, this Class B network shall be capable of performing Class A functions.
2. References
2.1 Applicable Publications—The following publications form a part of this specification to the extent specified herein. The latest issue of SAE publications shall apply.