SAE AMS 6463C:2000 pdf download

SAE AMS 6463C:2000 pdf download Wire, Steel Welding 18.5Ni – 8.5Co – 5.2Mo – 0.72Ti – 0.10Al Vacuum Melted, Environment Controlled Packaging
1. SCOPE:
1.1 Form:
This specification covers a maraging steel in the form of welding wire.
1.2 Application:
This wire has been used typically as filler metal for gas-tungsten-arc and inert gas-metal-arc welding of maraging steels requiring a joint capable of being heat treated to 280,000 psi (1931 MPa) tensile strength, but usage is not limited to such applications.
2. APPLICABLE DOCUMENTS:
The issue of the following documents in effect on the date of the purchase order form a part of this specification to the extent specified herein. The supplier may work to a subsequent revision of a document unless a specific document issue is specified. When the referenced document has been canceled and no superseding document has been specified, the last published issue of that document shall apply.
2.1 SAE Publications:
Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.
AMS 2248 Chemical Check Analysis Limits, Corrosion and Heat Resistant Steels and Alloys, Maraging and Other Highly-Alloyed Steels, and Iron Alloys
AMS 2370 Quality Assurance Sampling and Testing, Carbon and Low-Alloy Steel Wrought Products and Forging Stock
AMS 2813 Packaging and Marking of Packages of Welding Wire, Standard Method
2.1 (Continued):
AMS 2814 Packages of Welding Wire, Premium Quality
AMS 2816 Identification, Welding Wire, Tab Marking Method
AMS 2819 Identification, Welding Wire, Direct Color Code System
AMS 6514 Steel, Maraging, Bars, Forgings, Tubing and Rings 18.5Ni – 9.0Co – 4.9Mo – 0.65Ti – 0.10Al, Consumable Electrode Vacuum Melted, Annealed
ARP1876 Weldability Test for Weld Filler Metal Wire
ARP4926 Alloy Verification and Chemical Composition Inspection of Welding Wire 2.2 ASTM Publications:
Available from ASTM, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
ASTM D 2650 Chemical Composition of Gases by Mass Spectrometry
ASTM E 8 Tension Testing of Metallic Materials
ASTM E 8M Tension Testing of Metallic Materials, Metric
ASTM E 353 Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
ASTM E 1032 Radiographic Examination of Weldments
3. TECHNICAL REQUIREMENTS:
3.1 Composition:
Shall conform to the percentages by weight shown in Table 1, determined by wet chemical methods in accordance with ASTM E 353, by spectrochemical methods, or by other analytical methods acceptable to purchaser.
3.1.1 Check Analysis: Composition variations shall meet the requirements of AMS 2248, except that no variation is permitted for oxygen, nitrogen, and hydrogen.3.1.1 Check Analysis: Composition variations shall meet the requirements of AMS 2248, except that no variation is permitted for oxygen, nitrogen, and hydrogen.