SAE ARP 4946:2000 pdf download

SAE ARP 4946:2000 pdf download

SAE ARP 4946:2000 pdf download Aerospace – Valves, Check, Hydraulic, Aircraft and Missile
1 .4 Standard Parts: Check valves shall be furnished in the sizes specified on the applicable specification sheet. Standard parts shall be used wherever they are suitable for the purpose and shall be identified on the drawing by their part numbers. In the event there is no suitable corresponding standard part in effect, nonstandard/commercial parts may be used provided they conform to all requirements of this specification.
1 .5 Specification Sheets: The individual item requirements shall be as specified herein and in accordance with the applicable specification sheet. In the event of any conflict between the requirements of this recommended practice and the specification sheet, the latter shall govern.
2. APPLICABLE DOCUMENTS: The following publications form a part of this document to the extent specified herein. The latest issue of SAE publications shall apply. The applicable issue of other publications shall be the issue in effect on the date of the purchase order. In the event of conflict between the text of this document and references cited herein (except for associated detail specifications or specification sheets), the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
2.1 SAE Publications:
Available from SAE, 400 Commonwealth Drive, Warrendale, PA 1 5096-0001 .
ARP24 Determination of Hydraulic Pressure Drop
ARP603 Impulse Testing of Hydraulic Hose, Tubing, and Fitting Assemblies
ARP1 1 85 Flexure Testing of Hydraulic Tubing Joints and Fittings
AS1 241 Fluid, Fire Resistant, Phosphate-Ester Hydraulic Fluid for Aircraft
ARP1 383 Impulse Testing of Hydraulic Actuators, Valves, Pressure Containers and Similar Fluid System Components
AS4059 Aerospace – Cleanliness Classification for Hydraulic Fluids
AS4841 Fittings, 37° Flared, Fluid Connection
AS4941 Aerospace – General Requirements for Commercial Aircraft Hydraulic Components
AS5440 Hydraulic Systems, Aircraft, Design and Installation, Requirements for AS8775 Hydraulic System Components, Aircraft and Missiles, General Requirements for AMS-T-6845 Tubing Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System,1 /8 Hard Condition
2.3 FAR Publications from the FAA:
Available from the Federal Aviation Administration, 800 Independence Avenue, SW, Washington, DC 20591 .
FAR Part 25 Federal Aviation Regulations Airworthiness Standards
2.4 Joint Aviation Authorities Committee Documents:
Available from the Civil Aviation Authority, Printing and Publications Services, Grenville House,Cheltenham, Glos. GL50 2BN.
JAR Part 25 Transport Category Airplanes Joint Airworthiness Regulations
2.5 Radio Technical Commission for Aeronautics Documents:
Available from RTCA Secretariat, 44 Suite 500, 1 425 K Street, Washington, DC 20005.
RTCA/DO-1 60 Environmental Conditions and Test Procedures for Airborne Equipment (Radio Technical Commission for Aeronautics)