SAE AS 959B:2001 pdf download

SAE AS 959B:2001 pdf download Drive – Studded, Accessory, 2.653 B.C. Square, Design Standard For
1. OPERATING SPEEDS AND TORQUES，SHAFT TORS IONAL STRENGTH， AND ACCESSORY WEIGHT AND OVERHUNG MOMENT CAPABILITIES SHALL BE SPECIFIED IN THE APPLICABLE POWER SOURCE MODEL S PECIF ICATION OR BY THE PROCURING AGENCY.
2. SEE AIR 1160 FOR INFORMATION RELATIVE TO THE APPLICATION 0F THIS STANDARD.
3. DRIVE SHAFT: DETAILS 0F DRIVE SHAFT AND SPLINE DESIGN DATA ARE SHOWN ON AS972.
4. LUBRICATION: SPLINE LUBRICATION SHALL BE PROVIDED. METHOD OF LUBRICATION SHALL BE SPECIFIED IN THE APPLICABLE POWER SOURCE MODEL SPECIFI CATION OR BY THE PROCURING AGENCY.
5. OIL LEAKAGE: . OIL LEAKAGE OUT 0F THE DRIVE SHALL NOT EXCEED 0. 003L PER HOUR. PROVIS IONS FOR DRA INING OIL FROM THE DRIVE CAVITY SHALL BE SUPPLIED.
6. COVER: AN 100043 IS SUITABLE FOR THIS DRIVE.
7. ACCESSORY SPACE: SPACE AVAILABLE FOR ACCESSORIES SHALL BE SHOWN ON THE POWER SOURCE INSTALLATION DRAWING.
8. DIMENSIONS: ALL LINEAR DIMENSIONS ARE IN| [MILLIMETERS] INCHES. DIMENS IONS AND TOLERANCES : ANSI Y14. 5-1966. TRUE POS ITION TOLERANCES ARE AT MAX IMUM MATERIAL CONDITI ON UNLESS S PECIFIED. INTERNATIONAL SYSTEM UNITS (SI) ARE FOR REFERENCE ONLY.
9. TOLERANCES: LINEAR 士0.25] .010， ANGULAR 士20 UNLESS OTHERWISE SPECIFIED. 10. FINISH: BREAK SHARP EDGES [0.08 – 0.38] .003 – .015 UNLESS OTHERWISE SPECIFIED. SURFACE TEXTURE PER USAS B46. 1-1962.
11. MATING FLANGE: SEE AS960 FOR DETAILS OF MATING ACCESSORY FLANGE.
12. DES IGNATION: THE AS NUMBER WITH DASH NUMBER DEF INES THE CONFIGURATION 0F THE DRIVE. EXAMPLE : AS 959-1 DESIGNATES A [67.39] 2.653 BC SQUARE DRIVE WITH A [11.641] 0.4583 PD OUTPUT SPLINE.