SAE AMS 3168:2001 pdf download Aqueous Cleaners for Cleaning Prior to Application of Sealing Compounds
1 . SCOPE:
1 .1 Form: This specification covers liquid aqueous cleaners.
1 .2 Application: These aqueous cleaners have been used typically for cleaning aircraft primary and secondary structural surfaces prior to application of adhesion promoters and/or sealing materials, but usage is not limited to such applications.
1 .3 Safety – Hazardous Materials: While the materials, methods, applications and processes described or referenced in this specification may involve the use of hazardous materials, this specification does not address the hazards which may be involved in such use. It is the sole responsibility of the user to insure familiarity with the safe and proper use of any hazardous materials and to take necessary precautionary measures to ensure the health and safety of all personnel involved.
2. APPLICABLE DOCUMENTS: The issue of the following documents in effect on the date of the purchase order forms a part of this specification to the extent specified herein. The supplier may work to a subsequent revision of a document unless a specific document issue is specified. When the referenced document has been canceled and no superseding document has been specified, the last published issue of that document shall apply.
2.1 SAE Publications:
Available from SAE, 400 Commonwealth Drive, Warrendale, PA 1 5096-0001 or www.sae.org.
AMS 2473 Chemical Treatment for Aluminum Alloys, General Purpose Coating
AMS 2629 Fluid, Jet Reference
AMS 2825 Material Safety Data Sheets
AMS 3276 Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use
to 360 °F (1 82 °C)
AMS 3375 Adhesive/Sealant, Fluorosilicone, Aromatic Fuel Resistant, One-Part, Room
Temperature Vulcanizing
AMS 381 9 Cloths, Cleaning, for Aircraft Primary and Secondary Structural Surfaces
AMS 4045 Aluminum Alloy Sheet and Plate 5.6Zn 2.5Mg 1 .6Cu 0.23Cr 7075: (-T6 Sheet,-T651 Plate) Solution and Precipitation Heat Treated
AMS 41 01 Aluminum Alloy Plate, 4.4Cu 1 .5Mg 0.60Mn, (21 24 – T851 ) Solution Heat Treated, Stretched, and Precipitation Heat Treated
AMS 4202 Aluminum Alloy Plate, 5.7Zn 2.2Mg 1 .6Cu 0.22Cr, (7075-T7351 ) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated
AMS 491 1 Titanium Alloy, Sheet, Strip, and Plate 6Al – 4V, Annealed
MAM 491 1 Titanium Alloy, Sheet, Strip, and Plate 6Al – 4V, Annealed
AMS 5046 Sheet, Strip, and Plate, Carbon Steel (SAE 1 020 and 1 025) Annealed
AMS 641 9 Steel Bars, Forgings, and Tubing, 1 .6Si 0.82Cr 1 .8Ni 0.40Mo 0.08V (0.40-0.45C), Consumable Electrode Vacuum Remelted
AMS-C-27725 Coating, Corrosion Preventive, for Aircraft Integral Fuel Tanks AMS-QQ-A-250/4 Aluminum Alloy, 2024, Plate and Sheet
AS51 27/1 Test Methods for Aerospace Sealants, Two-Component Synthetic Rubber Compounds
PD2000 Procedures For an Industry Qualified Product Management Process
2.2 ASTM Publications:
Available from ASTM, 1 00 Barr Harbor Drive, West Conshohocken, PA 1 9428-2959 or www.astm.org.
ASTM D 51 2 Chloride Ion in Water
ASTM D 1 1 79 Fluoride Ion in Water
ASTM D 1 1 93 Reagent Water
ASTM D 1 475 Density of Paint, Varnish, Lacquer, and Related Products
ASTM D 3278 Flash Point of Liquids by Setaflash-Closed-Cup Apparatus
ASTM E 70 pH of Aqueous Solutions with the Glass Electrode
ASTM E 1 252 General Techniques for Qualitative Infrared Analysis
ASTM F 483 Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
ASTM F 51 9 Mechanical Hydrogen Embrittlement Evaluation of Plating Processes and Service Environments
ASTM F 1 1 1 0 Sandwich Corrosion Test
ASTM G 38 Making and Using C-Ring Stress-Corrosion Test Specimens
SAE AMS 3168:2001 pdf download
