SAE AS 1339F:2003 pdf download

SAE AS 1339F:2003 pdf download Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400 °F, Lightweight, Hydraulic and Pneumatic
1. SCOPE: This Aerospace Standard (AS) defines the requirements for a lightweight polytetrafluoroethylene (PTFE) lined, metallic reinforced, hose assembly suitable for use in high temperature, 400 °F, high pressure, 3000 psi, aircraft hydraulic systems, also for use in pneumatic systems which allow some gaseous diffusion through the PTFE wall.
2. REFERENCES:
2.1 Applicable Documents: The following publications form a part of this document to the extent specified herein. The latest issue of SAE publications shall apply. The applicable issue of other publications shall be the issue in effect on the date of the purchase order. In the event of conflict between the text of this document and references cited herein, the text of this document takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a specific exemption has been obtained.
2.1.1 SAE Publications: Available from SAE, 400 Commonwealth Drive, Warrendale, PA 15096-0001.
AMS 5557 Steel Tubing, Seamless and Welded, Corrosion and Heat Resistant, 18.5Cr 10.5Ni 0.40Ti (SAE 30321), Hydraulic, Solution Heat Treated
AMS 5561 Steel Tubing, Welded and Drawn, Corrosion and Heat Resistant, 9.0Mn 20Cr 6.5Ni 0.28N (SAE 21-6-9), High-Pressure Hydraulic
AMS 5565 Steel, Corrosion Resistant, Welded Tubing, 19Cr 9.5Ni (SAE 30304) Solution Heat Treated
AMS 5566 Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing, 19Cr 10Ni (SAE 30304) High Pressure, Cold Drawn
AMS 5567 Steel Tubing, Seamless or Welded, Corrosion Resistant, 19Cr 10Ni (SAE 30304),Hydraulic, Annealed
2.1.1(Continued);:
AMS 5570
Steel, Corrosion and Heat Resistant, Seamless Tubing,18Cr 11Ni 0.40Ti(SAE 30321), Solution Heat Treated
AMS 5573
Steel,Corrosion and Heat Resistant, Seamless Tubing,17Cr 12.5Ni 2.5Mo(SAE 30316),Solution Heat Treated
AMS 5575Steel, Corrosion and Heat Resistant, Welded Tubing,18Cr 10.5Ni 0.70(Cb+Ta)(SAE 30347),Solution Heat Treated
AMS 5581 Nickel Alloy, Corrosion and Heat Resistant, Seamless or Welded Tubing,62Ni 21.5Cr 9.0Mo 3.7(Cb+Ta)(SAE Inconel 625),Annealed
AMS 5639steel Bars, Wire, Forgings,Tubing and Rings, Corrosion Resistant, 19Cr 10Ni (SAE 30304),Solution Heat Treated
AMS 5643Steel, Corrosion Resistant, Bars,Wire, Forgings,Tubing and Rings,16Cr 4.ONi 0.30(Cb+Ta) 4.0Cu(SAE 17-4PH), Solution Heat Treated, Precipitation
Hardenable
AMS 5644 Steel Bars and Forgings, Corrosion Resistant,17Cr 7.ONi 1.OAl(SAE 17-4PH)
AMS 5645Steel, Corrosion and Heat Resistant, Bars,Wire, Forgings,Tubing and Rings,18Cr 10Ni 0.40Ti(SAE 30321),Solution Heat Treated
AMS 5646 Steel, Corrosion and Heat Resistant, Bars,Wire, Forgings,Tubing and Rings,18Cr 11Ni 0.6o(Cb+Ta) (SAE 30347),Solution Heat Treated
AMS 5647Steel, Corrosion Resistant, Bars, Wire, Forgings,Tubing and Rings,19Cr 9.5Ni (SAE 304L), Solution Heat Treated
AMS 5648Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings,Tubing and Rings,17Cr 12Ni 2.5Mo (SAE 30316),Solution Heat Treated
AMS 5653 Steel, Corrosion and Heat Resistant,Bars,Wire, Forgings,Tubing and Rings,17Cr 12Ni 2.5Mo (SAE 30316L),Solution Heat Treated
AMS 5659Steel, Corrosion Resistant, Bars, Wire, Forgings,Rings and Extrusions,15Cr 4.5Ni 0.30Cb 3.5Cu(SAE 15-5PH),Consumable Electrode Melted, Solution HeatTreated, Precipitation Hardenable
AMS 5666 Nickel Alloy, Corrosion and Heat Resistant, Bars, Forgings, Extrusions and Rings,62Ni 21.5cr 9.0Mo 3.65(Cb+Ta)(SAE Inconel 625),Annealed
AMS 5688Steel, Corrosion Resistant, Wire,18Cr 9.0Ni (SAE 30302)Spring TemperAMS 5689Steel, Corrosion and Heat Resistant, Wire 18Cr 10.5Ni 0.40Ti(SAE 30321),
Solution Heat Treated
AMS 5690Steel, Corrosion and Heat Resistant, Wire 17Cr 12Ni 2.5Mo(SAE 30316),Solution Heat Treated
AMS 5697 Steel, Corrosion Resistant, Wire 19Cr 9.5Ni (SAE 30304),Solution Heat TreatedAMS 5743Steel, Corrosion and Heat Resistant, Bars and Forgings 15.5Cr 4.5Ni 2.9Mo 0.10N(SAE AM-355),Solution Heat Treated, Sub-Zero Cooled,Equalized, andOver-Tempered
AMS-QQ-P-35 Passivation Treatments for Corrosion-Resistant Steels
Hose Fitting – lnstallation and Qualification Test Torque Requirements