SAE AS 27429:2000 pdf download

admin 2022-10-23 00:34

SAE AS 27429:2000 pdf download SPLICE, CONDUCTOR, DISCONNECT, CRIMP STYLE, COPPER, INSULATED BARREL, TYPE II, CLASS 1 FOR 1 05°C TOTAL CONDUCTOR TEMPERATURE
1 . MATERIAL
(a) FOR MS27429-1 AND MS27429-2:
ASTM-B-36-66 52T ALLOY NO. 230, DISCONNECT PORTION HARD TEMPER ROCKWELL B65 MINIMUM, OR ASTM-B-1 52-66, DISCONNECT PORTION HARD TEMPER, ROCKWELL F92 MINIMUM.
(b) FOR MS27429-3:ASTM-B-1 52-66 DISCONNECT PORTION HARD TEMPER, ROCKWELL F92 MINIMUM.
(c) INSULATION SLEEVE: THERMOPLASTIC (NYLON OR POLYETHYLENE).
2. FINISH: ELECTRO-TIN, PLATE .0001 INCH MINIMUM-THICKNESS TO MIL-T-1 0727.
3. INDENT .01 5 MINIMUM TO PREVENT INCORRECT ASSEMBLING.
4. RELIEF TO ALLOW FLUSH MATING OF SURFACES.
5. UPSET TO ASSIST RETAINING ACTION .002-.01 2 (BETWEEN MATED SURFACES).
6. “V” CUTOUT OPTIONAL.
7. BREAK ALL SHARP EDGES AND REMOVE ALL BURRS.
8. THESE FITTINGS ARE USED IN PAIRS – WHEN MATING ANY TWO FITTINGS MUST FORM A TIGHT SECURE SPLICE.
9. QUALIFICATION: FOR QUALIFICATION; SPLICES (MATED) SHALL BE TESTED WITH ANY ONE OF THE FOLLOWING WIRES: MIL-W-5086, MIL-W-1 6878 EXCEPT /8, /9 OR /1 0, MIL-W-22759/1 , /9 OR /1 1 OR MIL-W-81 381 /1 , /3 OR /7 AND TOOLING AS FOLLOWS: MIL-C-22520/5-01 TOOLING WITH MIL-C-22520/5-1 00 DIES INSTALLED FOR SIZES 22 THROUGH 1 0 SPLICES; OR MIL-C-22520/1 0-01 TOOLING WITH MIL-C-22520/1 0-1 01 DIES INSTALLED FOR SIZES 22 THROUGH 1 4 SPLICES AND MIL-C-22520/1 0-1 00 DIES INSTALLED FOR SIZES 1 2 THROUGH 1 0 SPLICES. EXISTING MS9041 3 AND MS331 6 TOOLS IN THE FIELD MAY BE USED UNTIL WORN OUT.
1 0. DIMENSION “J” REPRESENTS THE MINIMUM OPENING THAT WILL ACCEPT THE FINISHED WIRE.
1 1 . CONTOUR INDICATED BY PHANTOM LINES MAY VARY FROM THAT SHOWN TO SUIT INDIVIDUAL MANUFACTURER’S DESIGN.
1 2. INSULATION SUPPORT AND TERMINAL BARREL MAY BE MULTIPLE PIECE CONSTRUCTION.
1 3. WIRE INSERTION SHALL BE FACILITATED BY BELL MOUTH. 1 4. THE GOVERNMENT HAS A ROYALTY-FREE LICENSE UNDER U.S. PATENT NO. 3,51 6,043 DATED JUNE 2, 1 970, ENTITLED “HERMAPHRODITIC DISCONNECT TERMINAL” FOR THE BENEFIT OF MANUFACTURE OF THE ITEMS ILLUSTRATED HEREIN EITHER FOR THE GOVERNMENT OR FOR USE IN EQUIPMENT TO BE DELIVERED TO THE GOVERNMENT.

Download