IEEE Std 386:2006 pdf free download

IEEE Std 386:2006 pdf free download.IEEE Standard for Separable Insulated Connector Systems for Power Distribution Systems Above 600 v.
3.11 dead-front bushing arrester: An insulated and shielded surge protective device with a bushing operating interface.
3.12 dead-front elbow arrester: An insulated and shielded surge protective device with an elbow operating interface.
3.13 elbow: A connector component for connecting a power cable to a bushing, so designed that when assembled with the bushing. the axes of the cable and bushing are perpendicular.
NOTE—See Fizure I and Figure 2.
3.14 feed-thiu bushing insert: An accessory device with two electrically interconnected bushing
interfaces that can be installed into a bushing welL
3.15 feed-thru parking bushing: An accessory device with two electrically interconnected bushing
interfaces that can be installed into a parking stand.
3.16 grounding parking bushing: An accessory device designed to electrically ground and mechanically
seal a de-energized power cable terminated with an elbow and to be installed into a parking stand.
3.17 grounding tab: A projection on a connector component or accessory device designed for the
pLacement of a drain wire for the purpose of grounding the outer shield of the device.
3.18 insulated cap: Au accessory device designed to electrically insulate, electhcallv shield, and mechanically seal a bushing insert or integral bushing.
3.19 insulated parking bushing: An accessory device designed to electrically insulate, electrically shield.
and mechanically seal a power cable terminated with an elbow and to be installed into a parkuag stand.
3.20 insulated plug: An accessory device designed to electrically insulate. electrically shield, and mechanically seal an elbow interface.
3.21 integral bushing: An apparatus bushing designed for use with another connector component. such as an elbow.
NOTE—See Figure 1 and Figure 2.
3.22 loadbreak connector: A connector designed to close and interrupt rated Load current or less on energized circuits under specified conditions.
3.23 maiimum voltage raring: The highest phase-to-ground voltage (nns) for single phase systems or phase-to-ground and phase-to-phase voltage (rins) for three phase systems at which a connector is designed to operate
3.24 multi-way junction: An accessory device with two or more interconnected bushing andor bushing well interfaces.
325 operating eye: An integral part of an elbow or other accessory device designed for the attachment of a live-line tool used to handle or operate the device.