SAE AS 9712:2000 pdf download

SAE AS 9712:2000 pdf download SCREW, MACHINE – DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, CORROSION & HEAT RESISTANT STEEL, .138-40 UNJF-3A
REQUIREMENTS:
1. MATERIAL: CORROSION AND HEAT RESISTANCE STEEL IN ACCORDANCE WITH AMS 5708.
2. FINISH: SILVER PLATE IN ACCORDANCE WITH AMS 2410 .00O2-0006 THICK AT THREAD PD.DIMENSIONSSPECIFIED ARE AFTER PLATING.
3. THREADS: THREADS IN ACCORDANCE WITHMIL-S-8879.INCOMPLETE THREADS NOT TOENTER FILLET.
4. WRENCHING CONFIGURATION: WRENCHING CONFIGURATION IN ACCORDANCE WTH AS 870.
5. DIMENSIONING AND TQLERANCING: DIMENSIONING AND TOLERANCING SHALL BE IN ACCORDANCE WTH ANSIY14.5M.
6. SURFACE TEXTURE: SURFACE TEXTURE,UNLESS OTHERWISE SPECIFIED,SHALLBE125MICROINCHES EXCEPTuPSET HEAD IN AcCORDANCE WITH ANSi B46.1.
7. FLUORESCENT PENETRANT INSPECTION: FLUORESCENT PENETRANT INSPECTION SHALL BE IN ACCORDANCEwITH AMS 2645-83 BEFORE PLATING.
8. HEAD TO SHANK FILLET: HEAD TO SHANKFILLET SHALL BE COLD ROLLED AFTER HEATTREATMENTTO REMOVEALL VISUAL EVIDENCE OF GRINDING OR TOOL MARKS EXCEPT DASH NUMBER SIZES -10AND SMALLER.
9. MARKING: MARK PART NUMBER AND MANUFACTURER’S IDENTIFICATION IN ACCORDANCE WTHAS 478-79,CLASS A
10. TOLERANCES: UNLESS OTHERWISE SPECIFIED,TOLERANCES SHALL BE FOR LINEAR DIMENSIONS +.010,ANGULAR DIMENSIONS+5°.
11. EDGES: BREAK SHARP EDGES .003-.015 UNLESs OTHERWSE SPECIFIED.
12. PROCUREMENT SPECIFICATION: AMS 7471.
13. PART NUMBER: THE PART NUMBER SHALL CONSIST OF THE BASIC MS NUMBERFOLLOWED BY ADASH NUMBERFROM TABLE l.