SAE AS 515A:2001 pdf download

SAE AS 515A:2001 pdf download ADAPTER 1 0” TO 5” BOLT CIRCLE
1.Scope-SAEJ515 covers the specification for hydraulic O-ring material and properties and sizes applicable to
face seal fittings, metric and inch stud ends, and four-bolt flange fittings.The standard includes a size code toallow industry and government agencies to order O-ring with a coded part number.References
2.1 Applicable Publications—The following standards contain provisions which， through reference in this text,constitute provisions of this document. At the time of publication,the editions indicated were valid. Allstandards are subject to revision， and parties to agreements based on this document are encouraged toinvestigate the possibility of applying the most recent edition of the standards indicated as follows.
2.1.1 SAE PUBLICATIONS—Available from SAE,400 Commonwealth Drive, Warrendale, PA 15096-0001.
SAE AS568A——Aerospace Size Standard for O-Rings
SAEJ120—Rubber Rings for Automotive ApplicationsSAEJ200—Classification System for Rubber Materials
SAEJ518—Hydraulic Flanged Tube, Pipe,and Hose Connections,4-Bolt Split Flange TypeSAEJ1453-21—Specification for O-Ring Face Seal Fittings—Part 2: Fittings with SAE J1926/2(ISO 11926-2), Inch Stud Ends
SAEJ1453-32—Specification for O-Ring Face Seal Fittings—Part 3: Fittings with SAE J2244-2(ISO 6149-2),Metric Stud Ends SAE J1926-2—Connections for Fluid Power and General Use—Ports and Stud Ends with lSO 725 Inch Threads and O-Ring Sealing—Part 2: Heavy-Duty (S Series) Stud Ends—Dimensions, design,TestMethods and Requirements
2.1.2ISO PUBLICATIONS—Available from ANSI,25 West 43rd Street, New York,NY 10036-8002.
ISO 3601-3:1987—Fluid systems—Sealing devices—O-rings—Part 3: Quality acceptance criteriaISO 5598:1985—Fluid power systems and components—Vocabulary
ISO6149-2—Connections for fluid power and general use-Ports and stud ends with lSO 261 metric
threads and O-ring sealing—Part 2: Heavy duty (S series) stud ends—Dimensions,design，testmethods and requirements
ISO6149-3—Connections for fluid power and general use—Ports and stud ends with lSO 261 threads and O-ring sealing—Part 3: Light duty (L series) stud ends—Dimensions，design，test methods andrequirements
ISO 6162—Hydraulic fluid power—Four-screw split-flange connections for use at pressures of 2.5 MPa to 40 MPaType l inch series and type ll metric series
ISO 8434-3—Metallic tube connections for fluid power and general use—Part 3: O-ring face seal fittingISO11926-2—Connections for fluid power and general use-Ports and stud ends with ISo 725 threads and O-ring sealing—Part 2: Heavy duty (S series) stud ends—Dimensions, design, test methods, andrequirements
ISO11926-3—Connections for fluid power and general use—Ports and stud ends with ISO 725 threads
and O-ring sealing—Part 3: Light duty (L series) stud ends—Dimensions, design, test methods,andrequirements
2.1.3 ASTMPUBLICATION—Available from ASTM,100 Barr Harbor Drive,West Conshohocken, PA 19428-2959.
ASTM D 2000—Classification System for Rubber Materials in Automotive Applications
.2Related Publications—The following publications are provided for information purposes only and are not a required part of this document.
2.2.1 SAE PUBLICATION—Available from SAE,400 Commonwealth Drive,Warrendale,PA 15096-0001.
SAE AS871—Manufacturing and Inspection Standards for Preformed Packings (O-Rings)
2.2.2 ASTM PUBLICATIONS—Available from ASTM,100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
ASTM D 395—Test Methods for Rubber Property—Compression Set
ASTM D 412—Test Methods for Rubber Properties in Tension
ASTM D 471—Test Method for Rubber Property—Effect of LiquidsASTM D 624—Test Method for Rubber Property—Tear Resistance
ASTM D 865—Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure)
ASTMD 1329—Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)ASTM D 1414——Methods of Testing Rubber O-Rings
ASTM D 1415—Test Method for Rubber Property—International Hardness