SAE AMS 5569A:2001 pdf download Steel, Corrosion and Heat Resistant, Seamless and Welded Hydraulic Tubing 1 9Cr – 9.5Ni – 0.03C max Cold Drawn, 1 /8 Hard Temper
1 . SCOPE:
1 .1 Form:
This specification covers a corrosion and heat resistant steel in the form of two types of thin-wall,close-tolerance tubing 0.1 25 to 2.00 inches (3.1 8 to 50.8 mm), inclusive, in nominal OD.
1 .2 Application:
This tubing has been used typically in high pressure hydraulic or pneumatic systems assembled with brazed joints, but usage is not limited to such applications.
1 .3 Classification:
The tubing covered by this specification is classified as follows:
Class 1 – Seamless and Drawn
Class 2 – Welded and Drawn
1 .3.1 Unless a specific class is ordered, either class may be supplied.
2. APPLICABLE DOCUMENTS:
The issue of the following documents in effect on the date of the purchase order forms a part of this specification to the extent specified herein. The supplier may work to a subsequent revision of a document unless a specific document issue is specified. When the referenced document has been canceled and no superseding document has been specified, the last published issue of that document shall apply.
2.1SAE Publications:
Available from SAE,400 Commonwealth Drive, Warrendale,PA 15096-0001.
AMS 2248 Chemical Check Analysis Limits, Corrosion and Heat Resistant Steels and Alloys,Maraging and Other Highly-Alloyed Steels, and lron Alloys
AMS 2371
Quality Assurance Sampling and Testing, Corrosion and Heat Resistant Steels andAlloys,Wrought Products and Forging Stock AMS 2645
Fluorescent Penetrant Inspection
AMS 2807 ldentification, Carbon and Low-Alloy Steels,Corrosion and Heat Resistant Steels and Alloys, Sheet, Strip， Plate, and Aircraft Tubing
2.2ASTM Publications:
Available from ASTM,100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.
ASTM A 262
Detecting Susceptibility to lntergranular Attack in Austenitic Stainless Steels
ASTM A 370Mechanical Testing of Steel Products
ASTME112Determining Average Grain Size
ASTM E353 Chemical Analysis of Stainless, Heat-Resisting,Maraging, and Other Similar
Chromium-Nickel-Iron Alloys
ASTME 426 Electromagnetic(Eddy Current)Examination of Seamless and Welded Tubular
Products,Austenitic Stainless Steel and Similar Alloys
ASTM E1417 Liquid Penetrant Examination
2.3 u.S. Government Publications:
Available from DODSSP Subscription Services Desk， Building 4D,700 Robbins Avenue,Philadelphia, PA 19111-5094.
MIL-STD-753 Corrosion-Resistant Steel Parts, Sampling, Inspection, and Testing for Surface
Passivation
2.4 ANSI Publications:
Available from American National Standards Institute, Inc.,11 West 42nd Street,New York,NY10036.
ANSI B46.1Surface Texture
SAE AMS 5569A:2001 pdf download
