BS ISO 10145-2:2016 pdf download

admin
BS ISO 10145-2:2016 pdf download

BS ISO 10145-2:2016 pdf download.End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank
1 Scope
This part of ISO 10145 specifies the general dimensions of end mills with brazed helical hardmetal tips,with 7/24 taper shank.
The following two types of end mills with 7/24 taper shank are specified:
— end mills with 7/24 taper shank for manual changing;
— end mills with 7/24 taper shank for automatic tool changers.
This part of ISO 10145 applies to right-hand and left-hand end mills, irrespective of helix angle and number of flutes.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 297, 7/24 tapers for tool shanks for manual changing
ISO 7388–1, Tool shanks with 7/24 taper for automatic tool changers — Part 1: Dimensions and designation of shanks of forms A, AD, AF, U, UD and UF
3 Dimensions
The dimensions for end mills as shown in Figure 1 are specified in Table 1.