ISO 9934-2:2015 pdf download

ISO 9934-2:2015 pdf download.Non-destructive testing — Magnetic particle testing — Part 2: Detection media
1 Scope
This part of ISO 9934 specifies the significant properties of magnetic particle testing products (including magnetic ink, powder, carrier liquid, contrast aid paints) and the methods for checking their properties.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references,the latest edition of the referenced document (including any amendments) applies.
ISO 2160, Petroleum products — Corrosiveness to copper — Copper strip test
ISO 2591-1, Test sieving — Part 1: Methods using test sieves of woven wire cloth and perforated metal plate
ISO 3059, Non-destructive testing — Penetrant testing and magnetic particle testing — Viewing conditions
ISO 3104, Petroleum products — Transparent and opaque liquids — Determination of kinematic viscosity and calculation of dynamic viscosity
ISO 4316, Surface active agents — Determination of pH of aqueous solutions — Potentiometric method
ISO 9934-1, Non-destructive testing — Magnetic particle testing — Part 1: General principle
ISO 9934-3, Non-destructive testing — Magnetic particle testing — Part 3: Equipment
ISO 12707, Non-destructive testing — Terminology — Terms used in magnetic particle testing
EN 1330-1, Non-destructive testing — Terminology — Part 1: List of general terms
EN 1330-2, Non-destructive testing — Terminology — Part 2: Terms common to the non-destructive testing methods
EN 1330-7, Non-destructive testing — Terminology — Part 7: Terms used in magnetic particle testing EN 10083-2, Quenched and tempered steels — Part 2: Technical delivery conditions for non-alloy steels EN 10204, Metallic products — Types of inspection documents
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 1330-1, EN 1330-2, EN 1330-7, ISO 12707, and the following apply.
3.1 batch
quantity of material produced during one manufacturing operation having uniform properties throughout and with a unique identifying number or mark
6 Testing and test certificate
6.1 Type testing and batch testing
Type testing and batch testing of magnetic particle materials shall be carried out in accordance with the requirements of ISO 9934-1, ISO 9934-2, and ISO 9934-3. Type testing is carried out in order to demonstrate suitability of a product for the intended use. Batch testing is carried out in order to demonstrate conformity of the characteristics of a batch to the product type specified. The supplier shall provide a test certificate showing compliance with this International Standard having used the methods detailed. This certificate shall include results obtained and tolerances allowed. If any changes are made to the detection media, then a new type test shall be performed.
6.2 In-service testing
In-service testing is carried out to demonstrate the continued performance of the detection media.