BS ISO 16004:2017 pdf download.Aircraft ground equipment — Passenger boarding bridge or transfer vehicle — Interface requirements with aircraft doors
1 Scope
This document specifies dimensional interface and unobstructed space requirements applicable to the aircraft mating section of either a) passenger boarding bridges, or b) passenger transfer vehicles used at airports for boarding and disembarkation of passengers on the types of civil transport aircraft which have been listed hereafter. These types of aircraft have a door sill height greater than 2,0 m (80 in) over the ground. Lower aircraft usually do not require such means of access, and have not been taken into account.
NOTE “Aircraft type”, in this context, means the whole family of aircraft sub-types with the same fuselage design and the same general type designator, i.e. potentially includes any future derivative aircraft with the same fuselage. It is not the intent of the present document to specify any requirements applicable to aircraft design, but to make a status of aircraft passenger door 1 surrounding interface for aircraft designed up to year 2000. Future aircraft types with a new fuselage are expected to meet the main deck passenger doors requirements for interface with passenger boarding bridges or passenger transfer vehicles of ISO 7718 (all parts), which would ensure their compatibility with the aircraft mating section of passenger boarding bridges or passenger transfer vehicles meeting the requirements of the present document.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 6966-1, Aircraft ground equipment — Basic requirements — Part 1: General design requirements
ISO 6966-2, Aircraft ground equipment — Basic requirements — Part 2: Safety requirements
ISO 7718-1, Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicle — Part 1: Main deck doors
ISO 7718-2, Aircraft — Passenger doors interface requirements for connection of passenger boarding bridge or passenger transfer vehicles — Part 2: Upper deck doors
3 Terms and definitions
No terms and definitions are listed in this document.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— IEC Electropedia: available at http://www.electropedia.org/
— ISO Online browsing platform: available at http://www.iso.org/obp
4 General safety requirements
4.1 The passenger boarding bridge or passenger transfer vehicle design shall meet the appropriate requirements of ISO 6966-1 and ISO 6966-2.
4.2 In addition, the passenger boarding bridge design should, where applicable, meet the specific safety requirements of IATA AHM 922 and EN 12312-4.
BS ISO 16004:2017 pdf download
