BS EN 507:2019 pdf download

BS EN 507:2019 pdf download

BS EN 507:2019 pdf download.Roofing and cladding products from metal sheet – Specification for fully supported products of aluminium sheet
1 Scope
This document specifies requirements for roofing and cladding products used for assembly into coverings for wall claddings, linings and pitched roofs, made from aluminium sheet with or without additional surface treatment (organic coating or anodising). This document establishes general characteristics, definitions and labelling of the products, together with requirements for the materials from which the products can be manufactured. It is intended to be used either by manufacturers to ensure that their products comply with the requirements or by purchasers to verify that the products comply before they are despatched from the factory. It specifies the requirements for products which enable them to meet all normal service conditions. Products can be prefabricated or semi-formed products as well as strip, coil and sheet for on-site-formed applications [e.g. standing seam roofs). This document applies to all discontinuously laid and fully supported roofing and cladding products made of aluminium sheets. No requirements for supporting construction, design of roof system and execution of connections and flashings are included. This document does not apply to self-supporting aluminium sheets that are covered by EN 508-2.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN 485-1, Aluminium and aluminium alloys一Sheet, strip and plate 一Part 1: Technical conditions for inspection and delivery
EN 485-2, Aluminium and aluminium alloys一Sheet, strip and plate一Part 2: Mechanical properties
EN 485-4, Aluminium and aluminium alloys一Sheet, strip and plate一Part 4: Tolerances on shape and dimensions for cold-rolled products
EN 508-2, Roofing products from metal sheet 一 Specification for self-supporting products of steel,aluminium or stainless steel sheet – Part 2: Aluminium
EN 1396, Aluminium and aluminium alloys 一Coil coated sheet and strip for general applications一Specifications
EN 10204, Metallic products一Types of inspection documents
EN ISO 7599, Anodizing of aluminium and its alloys 一Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599)
3 Terms, definitions, symbols and abbreviations
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 485-1 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
一IEC Electropedia: available at
一ISO Online browsing platform: available at http:/ / obp
3.1.4 anodised aluminium sheet
aluminium sheet with an anodic coating, produced by an electrolytic oxidation process in which the surface of the aluminium is converted to a mainly oxide coating having protective, decorative or functional properties