BS 8303:2018 pdf download

admin
BS 8303:2018 pdf download

BS 8303:2018 pdf download.Installation of domestic heating and cooking appliances burning wood and solid mineral fuels – Specification
1 Scope
This British Standard specifies requirements for the design and installation of the following types of domestic heating and cooking appliances, rated up to 50 kW, burning wood, woody biomass and solid fuels in both new and existing buildings (see Clause 6):
a) open fires;
b) room heaters;
c) free-standing cookers; and
d) independent boilers.
The standard also specifies the procedures to be followed for on-site testing of the installations.
NOTE Where manufacturers’ installation instructions are more onerous and give a higher level of safety, these take precedence over the requirements of this British Standard.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes provisions of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
Standards publications
BS 1251, Open-fireplace components
BS 1252, Specification for domestic solid mineral fuel-fired, free-standing cookers with or without boilers 1
BS 3376, Specification for open fires burning solid mineral fuels with convection, with or without boilers
BS 4834, Specification for inset open fires without convection with or without boilers, burning solid mineral fuels
BS 7671, Requirements for Electrical Installations — IET Wiring Regulations
BS 8423, Fireguards for fires and heating appliances for domestic use — Specification
BS EN 303-5, Heating boilers — Part 5: Heating boilers for solid fuels, manually and automatically stoked, nominal heat output of up to 500 kW — Terminology, requirements, testing and marking
BS EN 1856-2, Chimneys — Requirements for metal chimneys — Part 2: Metal flue liners and connecting flue pipes
BS EN 12809, Residential independent boilers fired by solid fuel — Nominal heat output up to 50 kW —Requirements and test methods
BS EN 12815, Residential cookers fired by solid fuel — Requirements and test methods
BS EN 13229,Inset appliances including open fires fired by solid fuels — Requirements and test methods 2
BS EN 13240, Roomheaters fired by solid fuel — Requirements and test methods
BS EN 15250, Slow heat release appliances fired by solid fuel — Requirements and test methods
6.1.1.2 The designer shall specify the use of durable materials conforming to relevant British Standards or British Board of Agreement Certificate, or products bearing a CE mark as defined in the EU Construction Products Regulation [5], for the installation. NOTE This includes the requirement for an economically reasonable working life subject to normal maintenance and foreseeable operating criteria.