AS 1112.3:2015 pdf – ISO metric hexagon nuts Part 3: Product grade C.
If, in special cases, specifications other than those listed in this International Standard are required, they can be selected from existing International Standards, for example ISO 724. ISO 898-2, ISO 965-1 and ISO 4759-1.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable to its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
150 225, Fasteners — Bolts, screws, studs and nuts — Symbols and descriptions of dimensions ISO 724, Iso general-purpose metric screw threads — Basic dimensions
ISO 898-2, Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
ISO 965-1, ISO general-purpose metric screw threads — Tolerances — Part 1: Principles and basic data
ISO 3269, Fasteners — Acceptance inspection
ISO 4042, Fasteners — Electroplated coatings
ISO 4759-1 Tolerances for fasteners — Part 1: Bolts. screws, studs and nuts — Product grades A, B and C
ISO 8992, Fasteners — General requirements for bolts, screws, studs and nuts
ISO 10683, Fasteners — Non-electrolytically applied zinc flake coatings
ISO 10684, Fasteners — Hot dip galvanized coatings
3 Dimensions
See Figure 1 and Tables I and 2.
Symbols and descriptions of dimensions are specified in ISO 225.
AS 1112.3:2015 pdf – ISO metric hexagon nuts Part 3: Product grade C
