BS EN 13832-2:2018 pdf download

BS EN 13832-2:2018 pdf download.Footwear protecting against chemicals Part 2: Requirements for limited contact with chemicals
1 Scope
This European Standard specifies requirements for footwear to protect the user against limited contact in time with specific chemicals.
The following risks are covered: splashing and degradation by chemical.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
EN ISO 868:2003, Plastics and ebonite – Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003)
ISO 7000:2014, Graphical symbols for use on equipment一Registered symbols
EN 13832-1:2018, Footwear protecting against chemicals – Part 1: Terminology and test methods
EN 13832-3:2018, Footwear protecting against chemicals – Part 3: Requirements for prolonged contact with chemicals
EN ISO 20344:2011, Personal protective equipment – Test methods for footwear (ISO 20344:2011)
EN ISO 20345:2011, Personal protective equipment – Safety footwear (ISO 20345:2011)
EN ISO 20346:2014, Personal protective equipment – Protective footwear (ISO 20346:2014)
EN ISO 20347:2012, Personal protective equipment – Occupational footwear (ISO 20347:2012)
3 Terms and definitions
For the purposes of this document, the terms and definitions given in EN 13832-1, EN ISO 20345 and the following apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
●IEC Electropedia: available at http:/ /www.electropedia.org/
● ISO Online browsing platform: available at http://www.iso.org/obp
3.1 footwear for limited contact with chemicals Type U
footwear designed and manufactured to protect the wearer from splashing of chemicals on the upper.
The upper contact can be intermittent, not exceeding one hour.
3.2 footwear for limited contact with chemicals Type US
footwear designed and manufactured to protect the wearer from splashing of chemicals on the upper nd contact with the outsole. The upper and outsole contact can be continuous or intermittent ，not exceeding one hour.